På svenska In English
Search:
80-114-0 SEK 500  
80-114-015 SEK 952  
80-114-02 SEK 620  
80-114-025 SEK 572  
80-114-03 SEK 416  
80-114-04 SEK 392  
80-114-05 SEK 340  
 80-114-08 SEK 316  
 80-114-13 SEK 304  
80-1140 SEK 416  
80-1144 SEK 400  
 80-1145 SEK 424  
80-1148 SEK 1,136  
80-114R SEK 772  
Distance ring D-114 plastic, 20 mm89-04-11420 SEK 500  
89-04-11426R SEK 696  
Distance ring D-114 plastic, 35 mm89-04-11435 SEK 588  
Installation and maintenance:

The set (knives and plates) is assembled as listed below, as seen from the front.
1. Precutter (3 big holes) at the back.
2. Double knife No 1 is mounted in the counter-clockwise direction.
3. Middle plate (usually 13 mm).
4. Double knife No 2 is mounted in the counter-clockwise direction.
5. Mincer plate (2-8 mm) determines the coarseness of the minced meat.
6. Distance ring (thin) to hold parts in place.
7. The worm house nut is mounted and tightened, but only lightly with your fingertips. Do you have to pull harder to get good minced meat, the knives and plates are dull and needs to be sharpened.

Always keep the knives and plates together as a unit by mincing, washing or sharpening and never mix parts from different sets with each other. In this way you will maintain the parts "edgy" and you attain the highest quality of mincing.

Measurements:

Model Plate Ø Plate centre hole Knife centre hole
R-70 70 mm Ø 17 mm 12 x 9 mm
H-82 82 mm Ø 22 mm 16 x 12 mm
A-90 90 mm Ø 24 mm 18 x 15 mm
B-98 98 mm Ø 26 mm 19 x 15 mm
C-106 106 mm Ø 28 mm 20 x 16 mm
D-114 114 mm Ø 29 mm 21 x 17 mm
E-130 130 mm Ø 32 mm  23 x 19 mm
F-150 150 mm Ø 38 mm 28 x 22 mm
G-160 160 mm Ø 42 mm 32 x 23 mm
U-200 200 mm Ø 52 mm 40 x 32 mm
WK-250 250 mm Ø 63 mm 42 x 32 mm

All prices are exclusive of VAT.

Choose VAT included below!








Lars Öqvist AB Ormbergsvägen 4-6 (Gröndal) 117 67 Stockholm Phone +46-8 39 20 90 Mail infoAToqvist.se