Magnetic knife rack 50x6 cm, stanless

A very strong magnetic holder for wall mounting where you can put almost anything.
Made entirely of stainless steel - hygienic, easy to clean and stylish.

• Length: 50 cm
• Width: 6 cm
• 4 pcs M4 screws included for mounting wall brackets on the knife rack
• Screws for wall mounting (wood, drywall, sheet metal) not included

Mounting brackets inside (picture 2). This is how it is intended as standard. Neater, but you have to measure carefully with the brackets mounted on the loose knife rack. Remove the brackets again and screw them to the wall (screws for this are not included). Now mount the knife rack in the brackets with the enclosed screws.
Hole height cc: approx. 40 mm
Hole width cc: approx. 480 mm

Mounting brackets on the outside (image 3). A little easier, as the brackets can be mounted on the knife rack first and then on the wall together with the knife rack. Screws for wall mounting are not included.
Hole height cc: approx. 40 mm
Hole width cc: approx. 515 mm
There will be visible threads from the screws. Tip - buy shorter screws, shorten existing screws or buy and install stainless steel dome/hat nut to make it neater and easier to clean (see picture 4). Picture 5 shows with regular lock nut as we did not have dome nut M4 available when photographing.